Celestion Tf0818 100w 8ohm Lf Ferrite - WN 0739894533249

•    RICHIEDI TEMPISTICA
•     GARANZIA 2 ANNI

celestion - tf0818 100w 8ohm - lf pressed steel chassis loudspeaker - ferrite altoparlante da 8". con chassis in acciaio stampato. magnete in ferrite. bobina da 1.75".. potenza 100watt. impedenza 8ohm

caratteristiche - 8". driver providing 94db sensitivity and 100wrms (aes standard) power handling - 1.75". high temperature copper voice coil wound on polyimide former for increased reliability - achieves optimal performance in compact enclosures - exceptional performance through bass and mid-range - ideal for 2-way systems

specifiche generali nominal diameter: 203mm/8in power rating(1): 100wrms continuous power rating(2): 200w eia power rating(3): 150w nominal impedance: 8ohm sensitivity(4): 94db frequency range: 70-6000hz voice coil diameter: 45mm/1.75in chassis type: pressed steel magnet type: ferrite magnet weight: 0.88kg/31oz coil material: round copper former material: polyimide cone material: kevlar loaded paper surround material: cloth-sealed suspension: single xmax(5): 3.5mm/0.14in gap depth: 6mm/0.24in voice coil winding width: 13mm/0.51in

parametri di thiele-small d: 0.17m/6.69in fs: 95hz mms: 17.53g/0.62oz qms: 3.83 qes: 0.50 mmd: 15.60g/0.55oz qts: 0.44 re: 6.40ohm vas: 12.6lt/0.44ft3 bi: 11.36tm cms: 0.17mm/n rms: 2.62kg/s le (at 1khz): 0.75mh

informazioni di montaggio overall diameter: 208mm/8.19in overall depth: 99mm/3.54in cut-out diameter: 183mm/7.20in mounting slot dimensions: 9.5mm x 5.5mm/0.37in x 0.22in number of mounting slots: 4 mounting pcd range: 195-199mm/7.68-7.83in unit weight: 2.3kg/5.1lb

note (1)tested for two hours using a continuous. band-limited pink noise signal as per aes standard. power calculated on minimum impedance. loudspeaker tested in free air. (2)continuous power handling is defined as 3db greater than the aes rating. (3)tested as per the eia-426-a standard. (4)measured on axis at 1w. 1m in 2pi anechoic environment. (5)xmax derived from: (voice coil winding width-gap depth)/2. (6)small signal parameters measured after unit subjected to pre-conditioning signal.

 .