Celestion Tf1020 150w 8ohm Lf Ferrite - WN 0739894573658

•    RICHIEDI TEMPISTICA
•     GARANZIA 2 ANNI

celestion - tf1020 150w 8ohm - lf pressed steel chassis loudspeaker - ferrite altoparlante da 10". con chassis in acciaio stampato. magnete in ferrite. bobina da 2".. potenza 150watt. impedenza 8ohm

voglia di audio fai da te? per il progetto di un diffusore pa 10". compatto 2-vie. clicca qui design curato. collaudato e messo a disposizione direttamente da celestion

caratteristiche - 10". bass and mid-range driver provides 97db sensitivity and 150wrms (aes standard) power handling - 2". high temperature copper voice coil wound on polyimide for increased reliability - ideally suited to compact enclosures and high pass systems - rigid chasis design for maximum energy transfer - kevlar-loaded cone with sealed surround and damping for reduced distortion

specifiche generali nominal diameter: 254mm/10in power rating(1): 150wrms continuous power rating(2): 300w eia power rating(3): 250w nominal impedance: 8ohm sensitivity(4): 97db frequency range: 60-3000hz voice coil diameter: 50mm/2in chassis type: pressed steel magnet type: ferrite magnet weight: 1.2kg/42oz coil material: round copper former material: polyimide cone material: kevlar loaded paper surround material: cloth-sealed suspension: single xmax(5): 2mm/0.08in gap depth: 8mm/0.31in voice coil winding width:12mm/0.47in

parametri di thiele-small d: 0.21m/8.27in fs: 60.9hz mms: 30.92g/1.09oz qms: 2.853 qes: 0.361 mmd: 27.27g/0.96oz qts: 0.32 re: 5.79ohm vas: 37.45lt/1.32ft3 bi: 13.79tm cms: 0.221mm/n rms: 4.15kg/s le (at 1khz): 0.59mh

informazioni di montaggio overall diameter: 256mm/10.08in overall depth: 110mm/4.33in cut-out diameter: 229mm/9.02in mounting slot dimensions: 8mm x 6mm/0.31in x 0.24in number of mounting slots: 4 mounting pcd range: 245mm/9.65in unit weight: 3.7kg/8.2lb

note (1)tested for two hours using a continuous. band-limited pink noise signal as per aes standard. power calculated on minimum impedance. loudspeaker tested in free air. (2)continuous power handling is defined as 3db greater than the aes rating. (3)tested as per the eia-426-a standard. (4)measured on axis at 1w. 1m in 2pi anechoic environment. (5)xmax derived from: (voice coil winding width-gap depth)/2. (6)small signal parameters measured after unit subjected to pre-conditioning signal.

 .