Celestion Tf1230s 350w 8ohm Lf Ferrite - WN 0739894583251

•    SPEDIZIONE IN 24/48H
•     GARANZIA 2 ANNI

celestion - tf1230s 300w 8ohm - lf pressed steel chassis loudspeaker - ferrite altoparlante da 12". con chassis in acciaio stampato. magnete in ferrite. bobina da 3".. potenza 350watt. impedenza 8ohm

caratteristiche - 600w continuous power handling and 97db sensitivity - tough 12". ferrite bass/mid loudspeaker with kevlar loaded cone - optimised magnet assembly delivers impressive power to weight ratio - 3". high temperature edgewound copper clad aluminium voice coil wound on glass fibre former for enhanced reliability - double roll surround provides exceptional linearity at extremes of cone excursion - robust steel chassis for maximum energy transfer - ideal drop in replacement for mackie srm450 v3/v3

specifiche generali nominal diameter: 305mm/12in power rating(1): 300wrms continuous power rating(2): 600w eia power rating(3): 450w nominal impedance: 8ohm sensitivity(4): 96db frequency range: 50-4000hz voice coil diameter: 75mm/3in chassis type: pressed steel magnet type: ferrite magnet weight: 1.7kg/60oz coil material: edgewound copper clad aluminium former material: polyimide cone material: kevlar loaded paper surround material: cloth-sealed suspension: single xmax(5): 4.5mm/0.18in gap depth: 8mm/0.31in voice coil winding width: 17mm/0.67in

parametri di thiele-small(6) d: 0.26m/10.24in fs: 58.5hz mms: 49.92g/1.75oz qms: 3.154 qes: 0.492 qts: 0.426 re: 5.81ohm vas: 59.15lt/2.09ft3 bi: 14.71tm cms: 0.148mm/n rms: 5.82kg/s le (at 1khz): 1.05mh

informazioni di montaggio overall diameter: 317.5mm/12.5in overall depth: 137mm/5.43in cut-out diameter: 283mm/11.14in mounting slot dimensions: 13 x 6.6mm/0.51 x 0.26in number of mounting slots: 8 mounting pcd range: 299mm/11.77in unit weight: 4.3kg/9.5lb

note (1)tested for two hours using a continuous. band-limited pink noise signal as per aes standard. power calculated on minimum impedance. loudspeaker tested in free air. (2)continuous power handling is defined as 3db greater than the aes rating. (3)tested as per the eia-426-a standard (4)measured on axis at 1w. 1m in 2pi anechoic environment. (5)xmax derived from: (voice coil winding width-gap depth)/2. (6)small signal parameters measured after unit subjected to pre-conditioning signal.